This morning, I pulled a copy of 3.20 as follows:
git -C /sbbs/repo pull

I then ran the following command to compile:
cd /sbbs/repo/src/sbbs3; make RELEASE=1 symlinks

I eventually received this error:

Compiling upgrade_to_v319.c
Linking gcc.linux.x64.exe.release/upgrade_to_v319
Compiling upgrade_to_v320.c
Linking gcc.linux.x64.exe.release/upgrade_to_v320
make: *** No rule to make target 'sbbs_status.h', needed by 'gcc.linux.x64.obj.release-mt/sbbscon.o'. Stop.

I am presuming that it is fatal?

I am currently running 3.19 on the box in question.

Thanks.
#

---
■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP

On Thu, 22 Feb 2024 10:58:19 -0500
"Dumas Walker" (VERT/CAPCITY2)
<VERT/CAPCITY2!Dumas.Walker@endofthelinebbs.com> wrote:

This morning, I pulled a copy of 3.20 as follows:
git -C /sbbs/repo pull

I then ran the following command to compile:
cd /sbbs/repo/src/sbbs3; make RELEASE=1 symlinks

I eventually received this error:

Compiling upgrade_to_v319.c
Linking gcc.linux.x64.exe.release/upgrade_to_v319
Compiling upgrade_to_v320.c
Linking gcc.linux.x64.exe.release/upgrade_to_v320
make: *** No rule to make target 'sbbs_status.h', needed by 'gcc.linux.x64.obj.release-mt/sbbscon.o'. Stop.

I am presuming that it is fatal?

I am currently running 3.19 on the box in question.

Thanks.
#

---
■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP

You might want to run cleanall.sh from the /sbbs/repo/src directory
just in case. I'm sure DM will have some other answers but that might
get you started. It compiles fine here.
--
End Of The Line BBS - Plano, TX
telnet endofthelinebbs.com 23
---
￭ Synchronet ￭ End Of The Line BBS - endofthelinebbs.com

Re: Error Upgrading to 3.20
By: Dumas Walker to All on Thu Feb 22 2024 10:58 am

This morning, I pulled a copy of 3.20 as follows:
git -C /sbbs/repo pull

I then ran the following command to compile:
cd /sbbs/repo/src/sbbs3; make RELEASE=1 symlinks

I eventually received this error:

Compiling upgrade_to_v319.c
Linking gcc.linux.x64.exe.release/upgrade_to_v319
Compiling upgrade_to_v320.c
Linking gcc.linux.x64.exe.release/upgrade_to_v320
make: *** No rule to make target 'sbbs_status.h', needed by 'gcc.linux.x64.obj.release-mt/sbbscon.o'. Stop.

I am presuming that it is fatal?

You have a stale dependency. Running 'make clean' in the src/sbbs3 directory (first) would take care of that.
--
digital man (rob)

Synchronet/BBS Terminology Definition #90:
XON = Transmit On (ASCII 17, Ctrl-Q)
Norco, CA WX: 58.7°F, 77.0% humidity, 0 mph SW wind, 0.00 inches rain/24hrs
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

I then ran the following command to compile:
cd /sbbs/repo/src/sbbs3; make RELEASE=1 symlinks

I eventually received this error:

Compiling upgrade_to_v319.c
Linking gcc.linux.x64.exe.release/upgrade_to_v319
Compiling upgrade_to_v320.c
Linking gcc.linux.x64.exe.release/upgrade_to_v320
make: *** No rule to make target 'sbbs_status.h', needed by 'gcc.linux.x64.obj.release-mt/sbbscon.o'. Stop.

I am presuming that it is fatal?

You have a stale dependency. Running 'make clean' in the src/sbbs3 directory (
rst) would take care of that.

No dice. I ran 'make clean' in the sbbs3 directory, re-ran the make
command at the top of this message, and got the exact same error.

Neglin's suggestion of running cleanall.sh also didn't change the results.


* SLMR 2.1a * Ultimate office automation: Networked coffee machine.

---
■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP

Re: Error Upgrading to 3.20
By: Dumas Walker to DIGITAL MAN on Fri Feb 23 2024 09:44 am

I then ran the following command to compile:
cd /sbbs/repo/src/sbbs3; make RELEASE=1 symlinks

I eventually received this error:

Compiling upgrade_to_v319.c
Linking gcc.linux.x64.exe.release/upgrade_to_v319
Compiling upgrade_to_v320.c
Linking gcc.linux.x64.exe.release/upgrade_to_v320
make: *** No rule to make target 'sbbs_status.h', needed by 'gcc.linux.x64.obj.release-mt/sbbscon.o'. Stop.

I am presuming that it is fatal?

You have a stale dependency. Running 'make clean' in the src/sbbs3 directory (
rst) would take care of that.

No dice. I ran 'make clean' in the sbbs3 directory, re-ran the make
command at the top of this message, and got the exact same error.

Neglin's suggestion of running cleanall.sh also didn't change the results.

You would need to specify RELEASE=1 as well. By default, 'make' (and 'make clean') will build/clean debug binaries. You *cleaned* the debug output directory, but built the release target.
--
digital man (rob)

Steven Wright quote #20:
If Barbie is so popu, why do you have to buy her friends?
Norco, CA WX: 70.4°F, 31.0% humidity, 3 mph SW wind, 0.00 inches rain/24hrs
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

You would need to specify RELEASE=1 as well. By default, 'make' (and 'make cle
') will build/clean debug binaries. You *cleaned* the debug output directory, t built the release target.

OK that seemed to work! Thanks.


* SLMR 2.1a * Life is not a spectacle or a feast, it is a predicament.

---
■ Synchronet ■ Capitol City Test System